Header Ads

PLDT SMART HOME 4G Broadband GreenPacket OX-230 (POE)

Premium Outdoor modem to be installed outside, e.g. on the building side wall. Outdoor modem  has a highly sensitive built-in antenna, which ensures a confident signal receipt on the edges of the coverage area, in the countryside and in remote settlements.
Eto yung nakikita nyo Rectangular Shape na Antena  sa mga bubong ng Bahay..

Default GUI :
192.168.15.1
user:smart
password:smart







  • Plug and Play 
  • No Hassle 
  • Stable Connection
  • 9kilometers signal reception
  • No firmware needed to flash


WiMAX Specification
Standard
IEEE802.16e-2005 (WiMAX) Wave 2
Maximum RF Transmit Power
• 27dBm (combined 2TX)
Antenna Type
• 14dBi Dual polarization
Antena Tecnology

• Switched Transmit Diversity
• Maximal Ratio Combining
• MIMO Matrix A/B
• Beam Jamming
Data Rate
• Up to 30 Mbps (DL), 6 Mbps (UL)
Frequency Range
• 2.3 GHz ~ 2.4 GHz
(OX 230)
• 2.5 GHz ~ 2.7 GHz
(OX 250)
• 3.3 GHz ~ 3.6 GHz (OX 350)
Channel Bandwidth
• 5, 10 MHz, 7 MHz
(OX 350)
Adaptive Modulation
• DL: QPSK, 16QAM, 64QAM

• UL: QPSK, 16QAM, 64QAM
  (Subject to BS support)
Electrical & Mechanical
Dimensions (H x W x D)
• 354 x 220 x 68 mm
  (Without Mount Kit)
Temperature
• 40°C ~ 60°C (Operating)
• 40°C ~ 75°C (Storage)
Humidity
• 10%~85% non-condensing
  (Operating)
• 5%~95% non-condensing (Storage)
MTBF
• 50,000 hours
Weight
• < 2Kg
Surge Protection
• 4KV
Water Proof
• IP-67
Networking
DNS, NAT, DHCP, VPN & Firewall
• Yes
Remote Configuration and
Management Protocols

• TR069, SNMP v2c, OMA-DM
Local Management Protocols
• Web browser access, CLI
Auto Provosioning
• OTA (Over-the-air) software upgrade







PLDT SMART HOME 4G Broadband GreenPacket OX-230 Review
  • Open port 80 on LAN  and WAN  HTTP
  • Open port 443    HTTPS (same lang yung gui sa http )
  • Close Port  23  LAN and WAN Telnet
  • Open Port  22  LAN and  WAN  SSH  (backdoor ) 
  • Command on Change MAC  and Frequency same as on DV-235
  • Default log in  user :smart   password:smart   (you can  inject command to change  admin user  nad pass on ssh  )
  • Default  IP Gateway  is 192.168.15.1
  • NO WiFi
You  can  change mac using a putty  or  use my tools  below  1 click change mac + protection
Connect it  for Globe  and Smart  Frequency    user  admin    include on the editable scripts.
(di ko pa na try sa Globe sa totoo lang )

ADMIN  LOG IN ( If the tools is use )
user:admin
pass:smart

The Scanner   include the  BSID on each  Frequency



Upgrade /Downgrade option is available



Authentication  same  as  DV-235  but  added AES option.







Change Mac Tools
  • Install setupssh.exe
  • Press Windows Logo on keyboard  and Press R
  • type yes 
  • run the scripts
  • after ma  change mac  may admin na kayo pwede na din yung telnet..  edit nyo lang yung  scripts..
  • sa mga walang telnet or ssh  man lang gamit kayo yung mga backdoor tools  meron naman  jan sa tabi tabi  :v  search keyword " dv backdoor "
  •  if want nyo open yung telnet log in as smart:smart then open new tab then enable telnet http://192.168.15.1/adv-firewall.htm? 
  1.  log in gui 192.168.15.1
    user:smart
    password:smart
  2. ganito yung makikita nyo  http://192.168.15.1/index.html?WWW_SID=SID50863
  3.  palitan lng yun "index.html into "adv-firewall.html hit enter...   http://192.168.15.1/adv-firewall.?WWW_SID=SID50863
  4.  check telnet/ssh  then click save..  
















3 comments

Unknown said...

pano po steps para magamitan po ito ng router...salamat po

Chucks said...

@Nelson Cruz DHCP settings mo router mo then yung DNS manual mo lagay 8.8.8.8

Unknown said...

Sir, may iba na bang login details para sa smart/pldt gui? I tried smart/smart and admin/smart sa mga nai-scan ko pero ayaw na gumana like before as in lahat ayaw. May bagong login details na ba ngayon? Thanks.

blogmytuts. Powered by Blogger.