How to Downgrade and Reconnect SMART MyBrO Wimax +WiFi GreenPacket DV-235t

Chucks Friday, December 13, 2013 109

How to Downgrade and Reconnect SMART MyBrO Wimax +WiFi GreenPacket

NOTE:

Why need to downgrade ?

To have admin access Generic Firmware is needed If Generic Firmware is use your MODEM is UNLOCKED the default admin user

Why we need admin?

To have full control with telnet command and configuration etc.

TAKE NOTE: If the firmware is change with the admin rights you can access any ISP with wimax frequency so you can connect both Smart and Globe with the right MAC Address and Authentication and ISP frequency.

UPADATE: kung Version 7 na yung mybro mo huwag muna downgrade diretso kana sa mga scripts + protection

Green Packet modem has wide range Frequency this is possible.

How to Downgrade?

1. First download the generic firmware you can choose 1.0.5 or 1.0.4

PLEASE NOTE: This are not RAR or ZIP file Do Not Extract!!!

UPADATE: kung Version 7 pababa na yung mybro mo huwag muna downgrade diretso kana sa mga scripts + protection

Download DV-235t Firmware 1.0.5

Download DV-235t Firmware 1.0.4

Download DV-235t Smart Firmware V7

2. Log in to your Mybro by typing 192.168.15.1 on your Fave Browser

user:smart
pass:smart

3. Go to Management Click Recovery then click Factory Default.. then wait...

4. After the Reboot Log in again

Go to Management
Click Upgrade
Select your Firmware
Click Upgrade

NOTE: IF YOU CANNOT CLICK UPGRADE USE GOOGLE CHROME OR OTHER BROWSER

Sample Firmware 1.0.5

5. After Reboot Log in again
user:smart
pass:smart

TAKE NOTE GUI Changed :)

6. To make the new Firmware Effective.

Click Management
Click Recovery
Click Factory Default
Then Wait.....

7. After Reboot Thew Firmware is now activated than New IP is set 10.1.1.254

New User and Pass
user:admin
pass:admin

This is the new firmware

When Downgrade to 1.0.4
OPTIONAL SKIP to Step 8
Click Management
Click Upgrade

Same SIZE

If the Upgrade is un-clickable use Chrome or click tab on keyboard instead using mouse then click ENTER

8. Change Mac Authentication No Need mag change sa gui :P
Press windows LOGO+R
type :telnet 10.1.1.254 <enter>

USER ID and Password Common Sense Password Generator

YUNG NAKA RED JAN ANG PAPALITAN

FOR GLOBE

type :telnet 10.1.1.254 <enter>

password: admin <enter>

type:enable <enter>

type:router <enter>

type:wan mac < XX:XX:XX:XX:XX:XX> <enter>

type: commit <enter>

type: exit <enter>

type: wimax <enter>

type: wmx auth username 2008CzBIRnMMTXXX@globelines.com.ph <enter>

type: 2008CzBIRnMMTXXX<enter>

type: wmx auth a-id 781DBAXXXXXX@globelines.com.ph<enter>

type: wmx auth auto-prepend enable<enter>

type: wmx auth ignore-cv enable<enter>

type: commit<enter>

type: exit<enter>

type: reboot<enter>

type: commit<enter>

FOR SMART

type :telnet 10.1.1.254 <enter>

password: admin <enter>

type:enable <enter>

type:router <enter>

type:wan mac < XX:XX:XX:XX:XX:XX> <enter>

type: commit <enter>

type: exit <enter>

type: wimax <enter>

type: wmx auth username smart1_lancelot <enter>

type: smart1_lancelot<enter>

type: wmx auth a-id 001122334455@smartbro.net<enter>

type: wmx auth auto-prepend enable<enter>

type: wmx auth ignore-cv enable<enter>

type: commit<enter>

type: exit<enter>

type: reboot<enter>

type: commit<enter>

Sample Script gawa nalang kayo

set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 10.1.1.254"
cloner.SendKeys("{Enter}")
WScript.Sleep 4000

cloner.SendKeys"admin"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"admin"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"router"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wan mac 78:1D:BA:XX:XX:XX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wimax"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth username 2008CzBIRnMMTXXX@globelines.com.ph"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"2008CzBIRnMMTXXX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth a-id 781DBA1CXXXX@globelines.com.ph"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth auto-prepend enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth ignore-cv enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"reboot"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

9. Set Frequency

SMART

type :telnet 10.1.1.254 <enter>

password: admin <enter>

type:enable <enter>

type:router <enter>

type: exit <enter>

type: wimax <enter>

type: wmx freq add 2337500 10 <enter>

type: wmx freq add 2347500 10 <enter>

type: wmx freq add 2357500 10 <enter>

type: wmx freq add 2345000 10 <enter>

type: wmx freq add 2355000 10 <enter>

type: wmx freq add 2365000 10 <enter>

type:commit

type:exit:

type reboot

GLOBE

type :telnet 10.1.1.254 <enter>

password: admin <enter>

type:enable <enter>

type:router <enter>

type:exit <enter>

type: wimax <enter>

type: wmx freq add 2505000 10 <enter>

type: wmx freq add 2507500 10 <enter>

type: wmx freq add 2510000 10 <enter>

type: wmx freq add 2602000 10 <enter>

type: wmx freq add 2612000 10 <enter>

type: wmx freq add 2622000 10 <enter>

type: wmx freq add 2638000 10 <enter>

type: commit <enter>

type: wmx widescan clear <enter>

type: commit <enter>

type: exit <enter>

type: reboot <enter>

SIMPLE SCRIPTS

set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 10.1.1.254"
cloner.SendKeys("{Enter}")
WScript.Sleep 4000

cloner.SendKeys"admin"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"admin"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"router"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wimax"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx freq add 2602000 10"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx freq add 2612000 10 "
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx freq add 2622000 10 "
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx widescan clear "
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"reboot"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"GLOBE: CHANGE Frequency SUCCESSFULL!"
WScript.Sleep 1000

10.sa GUI double Check lang sa Authentication at Frequency

Mas maganda yung working Frequency lang ang ilagay pwede nyo iwan both smart and globe working frequency para change mac nalang kayo

Authentication

11.WAIT NYO Mag Connect

HOW TO SETUP WIFI

1. Go to Networking

click WiFi
Select User Defined
Click Next

2. Change SSID : Network Name

Select Authentication

Input WiFi password

Click Apply

TEST

HOW TO PROTECT YOUR Wimax from Remote Access

Networking -Firewall -CPE Access Control- Uncheck All

For Version 8 Firmware walang upgrade sa GUI gumamit ng Winspreader

1. Isave sa desktop yung winspreader at firmware tar.
2.Browse yung Firmware na tar.
3.i set yung LAN connection dapat alam mo alin ang LAN mo yung kung saan nakasaksak yung LAN ng Modem mo.

DOWNLOAD

WinSpreader V0.7

skips ads in 5 seconds

WAG TANGA: ang linaw na yan lalo na yung security tapos yung frequency bakit kailangan mag add mag palit ng frequency kung globe MAC gagamitin natural iba yung Frequency naka set default jan di yung sa globe an mag tanong IGNORE.

Passgenerator para sa walang clue LOL langya spood feed

Download

Di ako makapag change mac sa Mybro or GP?
gamit ka ng pang open or back door .. sample tools a available sa internet chicnagatas or media karne hindi ka mag kaka problema dyan kung inopen muna yung Telnet before ka mag upgrade..

Download MAC Changer Tool For GLOBE USER

Download MAC Changer Tool For SMART USER

DOWNLOAD LATEST SCRIPTS+Protection
eto para sa version 7 na firmware pababa no need downgrade firmware

MGA POTANG INA TANONG !!!
sawang sawa na ako mag reply!

POTANG INA TANONG 1:
Bakit walang upgrade? potang ina nag basa kaba winspreader ang gagamitin..

POTANG INA TANONG 2:
Bakit di ma download yung firmware?
Potang ina nasa step 1, 3 firmware yun skip ads in 5 second lilitaw click skip bobo , kung walang lumitaw yung browser mo binablock ads ko potang ina alisin mo adblock or palitan mo browser mo

POTANG INA TANONG 3:
Bakit di makapag type ng password sa telnet?
Potang ina beginer kaba?? talgang walang makikita sa pag type mo invisible yan nag tataype ka di mo nakikita talga pota!!
kung ayaw mo mag type meron mga scripts downloadable 3 panga yun ayan yung naka orange bago yung potang ina tanong..

109 comments

Unknown said...: nice nilabas na yung firmware v0.4 oh; December 19, 2013 at 3:26 PM
Unknown said...: complete pakage..pasko na talaga^^; December 23, 2013 at 11:30 PM
eem553 said...: sir paano sa authentication? username..khit ano ba un...tska sa id ung my smartbro.net saan kukunin un; December 24, 2013 at 3:36 PM
Unknown said...: OK lng ba to gamitin sa mga connected pa na device?? :D; December 29, 2013 at 9:04 AM
Unknown said...: sir bat po walang internet tong skin nagawa ko nman lahat ng nasa taas. Dapat po ba ibang mac address ung gmitin? Ung dating mac address kasi ung ginamit ko eh. Ung dev state po nya palaging connecting at ready. ung mac state nmn po network entry at disconnect lng. Okay nmn na po un frequency na set ko na rin.

pa tulon namn po :-) :-) thanks
di oo na po talaga alam gagawin ko; December 31, 2013 at 10:58 PM
Unknown said...: sir bat po walang internet tong skin nagawa ko nman lahat ng nasa taas. Dapat po ba ibang mac address ung gmitin? Ung dating mac address kasi ung ginamit ko eh. Ung dev state po nya palaging connecting at ready. ung mac state nmn po network entry at disconnect lng. Okay nmn na po un frequency na set ko na rin.

pa tulon namn po :-) :-) thanks
di oo na po talaga alam gagawin ko; December 31, 2013 at 10:58 PM
Unknown said...: sir ano po kaya problema nitong skin? Nagawa ko naan po sya ng maayos. Dapat po ba ibang mac address ung ggmitin? ung dating mac address kasi un inamit ko eh. Nakapag set na po ako ng frequency. Meron nmn syang RSSI at CINR. Tsaka ung dev state po at mac state po sa status na tab. connecting.... scanning... ganon lng sya.

pa tulong nmn po. di ko n po kasi alam ggwin ko eh..; December 31, 2013 at 11:06 PM
Chucks said...: @Estrella Ocon

gumamit kaba ng mac changer tools kung smart smart tools gamitin mo at kung globe globe mac changer gamitin mo wait update ko yung post ko baka nalilito ka lang :v; January 1, 2014 at 11:33 PM
Unknown said...: sir pahelp po, up to step 4 lang ako,
nag downgrade ako v 1.0.4 after nun,
hnd na ako nka connect sa 192.168.15.1
ng iba na ung name nung network, hndi na may bro, pati ung password nya iba na, phelp po; January 6, 2014 at 9:47 PM
Unknown said...: boss nung ginamit ko yung mac changer sa smart dko na mapasok yung modem gui ko.. ano po kaya prob? ayaw sa admin admin' na update ko na sa 04 na firmwre; January 12, 2014 at 4:02 PM
Unknown said...: boss nagawa ko na. 1.0.4 gamit ko.. pero nung ginamit ko na mac changer dko na mapasok yung admin admin na gui ano po ba posible na probe? salamat boss; January 12, 2014 at 4:05 PM
jasperCrEw007 said...: sir thanks d2!! e2 n ung hinahanap q!! nkita q din!! galing mo idol!!; January 12, 2014 at 11:32 PM
Chucks said...: @sanny cawaling

yung script ay editable malay ko anung gamit mo admin pass i edit ayun sa iyong pangagailangan

at kung di marunong mag edit nakasaan naman sa mac changer anung admin

OR di ka nag factory reset; January 15, 2014 at 1:41 AM
Unknown said...: Salamat sa pag sagot ng tanong ko boss salamat. Pwd bako mag request ng script n pang palit ng mac na ang passwd name ko. Hehhe kung ok labg naman boss. Salamat; January 17, 2014 at 3:25 AM
Chucks said...: @sanny cawaling POSTED na yung mga scripts i edit lang sa pangnag ilangan; January 17, 2014 at 1:26 PM
Unknown said...: sir my firmware 3 ka pa send po? kangaroo29j@yahoo.com; January 18, 2014 at 8:35 PM
rommel.b.gomez said...: I wantes to change from smart to globe, question lang sir under sa "management" sa gu.. may papalitan pa bang ACS username and password? Thanks!!; January 20, 2014 at 3:40 AM
Chucks said...: @Irish May Lopez nag babasa po ba kayo?? kaya nga naka take NOTE sa step 5 sus; January 21, 2014 at 8:05 PM
Chucks said...: @rommel.b.gomez kung binasa nyo maayos yan sir di ka nag tatanong ng ganyan completo na ho yan :v ay nako; January 21, 2014 at 8:14 PM
Unknown said...: salamat po; January 23, 2014 at 11:40 AM
Unknown said...: Kuya name pano po ung mga code saan point b I enter tan said cmd point b?; January 25, 2014 at 4:52 PM
Unknown said...: Sir Not found na po yung mga links ng Passgenerator at Mac changer too for smart. Kindly help. Thanks.; February 1, 2014 at 12:02 AM
Unknown said...: sir ask lang po, ndowngrade kuna sa 1.0.4 ung greenpacket
nka pasok ndin ako sa GUI 10.1.1.254 using admin admin as username and password
after ilang days nwlan ako connection, tpos d nrin ako mka pag log in sa GUI,
ano po pwede ko gawin? salamat po :); February 6, 2014 at 2:18 PM
Unknown said...: ask lang po idol working pa pu ba un mga links at san dn pu la2gay un script thankyou idol .; February 8, 2014 at 3:02 PM
Unknown said...: ask lang po idol working pa pu ba un mga links at san pu la2gay un mga code sa script .; February 8, 2014 at 3:04 PM
Unknown said...: after upgrading hindi na ako maka connect sa modem nag iba na ang password, help naman po.. thanks; February 12, 2014 at 12:37 AM
Unknown said...: kuya bakit ung akin gumagana naman tapos biglang nawala internet then nd na sya makapasok using admin/admin; February 15, 2014 at 8:02 AM
Unknown said...: sir di po ako maka login as admin admin.. user user lang po.. help po :'(; February 25, 2014 at 1:26 AM
Unknown said...: sir di po ako maka login as admin admin.. after ko sundin yun steps :'( user user lang po help :'(; February 25, 2014 at 1:28 AM
Unknown said...: Good am sir,
Late last year, I bought a smart mybro and it came with a 'v2.10.14-g1.0.8-smart' firmware.
What I want to know is, can I downgrade it to an older version? Say version 5 or 7. If so, is it reversible?
TIA :); March 14, 2014 at 10:21 AM
Unknown said...: Boss pang downgrade sa .v0.8 meron naba? Nag 0.8 kc yung modem na isa; March 16, 2014 at 12:30 AM
miyu said...: bkit walang UPGRADE sa management ng ganean ko ? i have 2 of those wifi brand with same model wlang option for upgrade ?? or downgrade ? tinignan ko na po everywhere wla tlga; March 18, 2014 at 9:23 AM
randy said...: sir may hack ka ba ng globe tattoo pede pashare thanks,,; March 28, 2014 at 11:29 PM
Unknown said...: sir patulong nmn kc nung nag flash ako ng green pocket sa bm622m ko khit mag palit ako ng mac blingking lang ung signal nya anu kya problena n2...pa2long nmn; March 31, 2014 at 8:27 PM
Chucks said...: @jahn ray saurez blogmytuts.blogspot.com/2014/03/how-to-fix-huawei-bm622m-no-signal.html?; April 1, 2014 at 10:48 PM
Unknown said...: Boss pwd po ba yan gamitin sa OX230??salamat po; April 4, 2014 at 12:53 AM
Unknown said...: pwd po ba gamitin yang v.4 sa OX230 via winspread?tnx; April 4, 2014 at 12:54 AM
ImbaMan said...: pano sir malalaman kung working ung mac na ginamit mo? salamat; April 22, 2014 at 10:13 PM
Chucks said...: @ImbaMan may check yung logo sa itaas ?? at may kulay yung globo; April 23, 2014 at 2:40 AM
Unknown said...: Sir, help po. nagawa ko na po lahat dyan except for step 9. "telnet not found'' po sabo ng run. pano po ba to? please help po :(; April 29, 2014 at 9:05 AM
Chucks said...: @Paul Mancia's Blog Iligan City East High School yung windows mo naka enable naman ba yung telnet enable mo muna telnet search mo "how to enable windows (7,8alin windows ka)telnet .. kung naka enable naman yung telnet ng windows mo malamang yung modem ang di naka enable; April 29, 2014 at 10:26 AM
Unknown said...: sirr! thank you talaga. next question ko po ano po yung nga naka red na font? ano papalitan dun? :); April 29, 2014 at 2:33 PM
Chucks said...: @Paul Mancia's Blog Iligan City East High School KUNG ayaw nyo mahirapan bakit di nyo download mga tools jan sa ibaba ready mac 1 click change mac ka nalang........... eto yung latest http://blogmytuts.blogspot.com/2014/03/smart-mybro-v7-change-mac.html; April 29, 2014 at 3:02 PM
Unknown said...: mga men bkt pag ina upload ku na ung firware wala na dw aku space; May 6, 2014 at 4:16 PM
Unknown said...: Sir pahelp nmn ako. try ko upgrade sa firmware v7 d nako maka login eh. iba na ung username at password. salamat; May 10, 2014 at 12:35 PM
Chucks said...: @SimpleGuy KJ yung mga pang change mac tools gamit ko dito kasama na yung admin sa scripts user:admin password:smart ang gamit ko.; May 13, 2014 at 9:44 PM
Unknown said...: still working ? as of may 2014 ?; May 13, 2014 at 11:57 PM
Chucks said...: @hana deloso working; May 14, 2014 at 6:47 PM
Unknown said...: sir tanong ko lang po, bakit po d ko po maccess ung telnet 10.1.1.254 pag nagpupunta po ako sa run (windows logo + R) ?; June 5, 2014 at 11:44 AM
Chucks said...: @Nej Zen enable mo yung telnet ng windows mo at modem; June 5, 2014 at 4:19 PM
Unknown said...: Sir. After ko i factory default naging mybro ulit yung pangalan ng wifi tas hindi na ako makaconnect kaya hindi ko na maaccess yung login page ng modem. ano gagawen ko? Thanks!; June 5, 2014 at 7:21 PM
Chucks said...: @Kinno Cunanan ZZZ.. bakit sa wifi ka pumapasok mag iiba na yung password nyankaya nga factory default babalik sa factory default yung password nyan ...... sa LAN ka po pumasok saka mo i set ulit wifi; June 6, 2014 at 2:57 PM
Robin said...: sir need help..
bkit po ung sken Firmware version:
v2.10.14-g1.0.8-smart

at under management
wla po ung upgrade button
pano po ang gagawin ko?

salamat po..; June 18, 2014 at 8:30 AM
Robin said...: @Jaime Lacson

sir need help..
bkit po ung sken Firmware version:
v2.10.14-g1.0.8-smart

at under management
wla po ung upgrade button
pano po ang gagawin ko?

salamat po..; June 18, 2014 at 8:31 AM
Chucks said...: @Robin gamit kapo ng winspreader ng pang upload ilalagay kona din yan sige; June 19, 2014 at 3:49 PM
Unknown said...: Working pa po ba to? Thanks :-); July 5, 2014 at 12:09 AM
PiLsToP said...: boss nasa ver 7 kana, bakit nag ver 5 pa dito sa sample na to? yung recon ba na nandito applicable for ver 7?

sir sana sama ka tut recon for smart; July 9, 2014 at 10:31 PM
Chucks said...: @PiLsToP v5 v4 v7 same lang yung command jan meron naman tools yung naka orange sa ibaba gamitin nyo kung tinatamad kayo gumawa ng scripts or walang idea; July 11, 2014 at 1:14 PM
Unknown said...: Sir, tanong ko lang po, pano po maibalik lang ung WIFI capability ng WIMAX ko, nawala po kasi? salamat po; July 27, 2014 at 7:25 AM
Chucks said...: @Rolando Yaco logbin ka sa telnet saka mo pasok etong command "rm_default.cfg"; July 27, 2014 at 5:45 PM
Unknown said...: boss san mang gagaling yun wan mac, auth username at auth a-id??; August 1, 2014 at 9:38 AM
Chucks said...: @pao dolor yung i co clone mo legit; August 1, 2014 at 1:43 PM
Unknown said...: ginamit ko kasi yung SMART+protect_mactoolss na script, diba magiinput ka dun ng mac address, pag valid ba yung nainput dun na mac address magcoconect na yun?; August 1, 2014 at 2:29 PM
Chucks said...: @pao dolor kaka sabi ko seyempre yung valid at working na legit mong I coclone..; August 3, 2014 at 11:36 PM
Warren Lariza said...: boss bakit d na ma DL ung v5 na firmware?; August 12, 2014 at 10:32 AM
Chucks said...: @Warren Lariza WORKING!!! pa isa kadin sa bagohan.. Puro no Working ang Sinasabi..

Naka lagay na sa skips ads in 5 seconds dipa magawa; August 13, 2014 at 3:07 AM
Unknown said...: bat di po ako makapasok sa telnet??; August 14, 2014 at 6:44 PM
Chucks said...: @lester esmino PAKIBASA po ng maigi ng DI NAG TATANONG
kung Version 8 yang sayo malang siyempre close yung telnet nyan kaya nga may downgrade option eh.; August 14, 2014 at 11:41 PM
Unknown said...: @lester esmero sir ayaw po ng telnet.panu po to?; September 6, 2014 at 2:54 PM
Unknown said...: @Jaime Lacson sir ayaw pumasok ng telnet; September 6, 2014 at 2:56 PM
Kwentologist said...: Boss salamat po dito mukhang kailangan ko ito. :-D; September 20, 2014 at 7:52 PM
mervin said...: Wala na po ung RECOVERY option..; October 8, 2014 at 4:26 AM
mervin said...: Excuse po dun po sa 4th instruction.. wala na po ung option na upgrade... panu na po nyan?; October 8, 2014 at 4:54 AM
Chucks said...: @mervin basahin yung sa Version 8 naka post po dyan; October 11, 2014 at 11:55 PM
Chucks said...: @mervin version 8 yan kaya wala upgrade, winspreader gagamitin mo dyan; October 12, 2014 at 12:10 AM
Unknown said...: nakapagdowngrade na po ako, nalilito ako sa ilalagay sa authentication, default po ba yung smart1_lancelot? or may basehan para sa mga ilalagay dun, nakakachange wan mac naman ako pero wala pa rin connection, dun lang talaga ako nalilito, thanks po, xensiya na, newbie po ako; October 29, 2014 at 4:29 PM
Unknown said...: @Jaime Lacson
sir yung mybro ko kakareconnect lng ask ko lng kung pano mag lagay ng mac kung sakali ma disconnect n ko pag n n gumana yung nilagay n mac; November 4, 2014 at 6:09 PM
Chucks said...: @harold jayson colobong may mga tools dyan naka post na yung naka orange ilalagay nyo yun mac sa tools siyang bahal sa authentication...................
kung smart kayo manual nyo lagay pempem key at certificate .. kung Globe kayo Mac lang sapat na sa tools................... basahin nyo yung mga bagong post matagal na kasi etong post na eto kaya nag lagay ako ng download link sa ibaba naka ORANGE; November 8, 2014 at 3:52 AM
Chucks said...: @Alex Mique Aayn ho yung TOOLS naka ORANGE gamitin nyo yun pag meron kayo working mac.....................................................................................; November 8, 2014 at 3:55 AM
Unknown said...: Sir wala pong upgrade button sakin; November 8, 2014 at 3:45 PM
Unknown said...: Bakit po walang upgrade button; November 8, 2014 at 3:46 PM
Chucks said...: @Herebert Duag HERBERT Binasa Mo ba talga yung sa itaas parang Hindi ..LOL linaw naka kulay Blue yung version 8 na firmware yung walang Upgrade gagamit ka ng Winspreader... sa lahat ng ayaw ko yung nakasulat na di pa makita...; November 13, 2014 at 1:29 AM
Zartacla said...: Sir available pa po ba ung site ng pag downgrade-an ng firmware?? wala po kc eh...; November 18, 2014 at 11:11 AM
Zartacla said...: Sir available pa po ba ung site ng pagdownloadan ng firmware? hindi ko po kasi ma download eh.. Please help. Thanks.; November 18, 2014 at 11:12 AM
Zartacla said...: Sir, pano kung walang button na upgrade? Log, recovery and ping lang po..; November 18, 2014 at 11:30 AM
Zartacla said...: Sir naguguluhan ako.. pano maconfirm kung nag change mac na? wala kc nakalagay na changed mac succesfully sakin. bsta lost connection to host lang.. pa help idol..; November 19, 2014 at 5:31 PM
nhad said...: boss bakit ganon laging fail upgrade not compatible daw? version 6 smart yung version ng firmware nya nung reset factory?; November 19, 2014 at 8:23 PM
nhad said...: boss hindi nako makapagtype ng password sa telnet after ng username?; November 19, 2014 at 10:13 PM
Chucks said...: @nhad Invisible naman talga pag type ng password dyan kahit anung telnet pa yan ehh!!! nag tatype yan di mo nakikita sus; November 20, 2014 at 2:12 AM
Chucks said...: @Zartacla di ka din nag babasa ng maayos sinagot kuna yan gamit ka winspreader; November 20, 2014 at 2:20 AM
Chucks said...: @Zartacla NASA STEP 1 available na available 3 firmware yan!! skips add in 5 seconds mababasa mo naman yun edi skip ads ka or baka may addblock ka sa browser mo alisin mo or palit ka browser ...; November 20, 2014 at 2:22 AM
Chucks said...: @Zartacla same kayo yun isang nag tagnong mag kamag anak ba kayo ni herbert ha?????????????

ganyan din tanong naka sulat na winspreader para sa walang updage buton; November 20, 2014 at 2:23 AM
Al Collado said...: Dead link ung pass gen; May 7, 2015 at 3:29 PM
Chucks said...: yung scripts naka post naman copy mo yung scripts sa notepad save as mo Passgen.wsf; May 8, 2015 at 9:57 AM
Unknown said...: sir nag error 403 skin passgenerator

http://code.google.com/p/blogmytuts-manual-mac-hunt/downloads/detail?name=PassGeneratorONLY.wsf&can=2&q=#makechanges; May 9, 2015 at 3:23 PM
Chucks said...: matagal na shutdown ng google code yun..naka naka post naman yung scripts duon copy nyo sa notepad save as mo passgen.wsf
same lang yung tanong mo sa itaas mo ehh..

http://www.blogmytuts.net/2015/03/google-code-shutting-down.html; May 10, 2015 at 9:26 PM
Unknown said...: kailangan hu ba ng internet sir?; May 22, 2015 at 12:53 PM
Chucks said...: Wala internet yung modem.. kaya po i rereconnect yung modem sir.. need lang is a working mac .. which is nabibili or you can hunt your own live mac address; May 23, 2015 at 5:39 PM
Unknown said...: sir panu naman ho mag hunt ng mga live mac address??
tsaka sir pano ko malalaman version ng mybro namen? nung 2012 paata to samen.Pasensya na sa pantangang sagot..Beginner plang ih:D; May 25, 2015 at 7:19 PM
Chucks said...: Madami naka post na tools gaya ng wimac tool ni casper wimax tools ni xxyyzz... yung version pag laog in mo palang sa smartBro nasa pambungad sa LOGO ng SMARTBRO firmware version ....nakikita mo naman siguro sa mga image sa itaas tabi ng LOGO may firmware version.. kahit beginer ka nababasa mo naman siguro yun..; May 25, 2015 at 7:56 PM
Chucks said...: Kung last number ay 7 wag muna i downgrade ok na pang explore yan.. V8 downgrade mo ng V7 para hindi ka mahirapan..

madami na tuts nakapost dito mag basa ka nalang.. dahil kung itatanong mo pa sakin yan.. ilang araw explanation yan.. naka explain na sa mg post anu paano para saan gagamitin..; May 25, 2015 at 8:00 PM
Unknown said...: Boss @JAIME LACSON nagamit ko ng 2 months ung myBRO gamit ang procedure na yan.. ang tanong ko ngayon..mahina na ung speen ng internet kahit e reboot ko pa at ulitin ganun parin.. kelangan ko ba ng bagong live Mac? or may remedyo neto? pls po pa help or email po nyo ako thnx in advance!; June 3, 2015 at 10:44 PM
Chucks said...: Lahat naman nakakak ranas ng kabagalan may peak hours kasi madaming gumagamit ng connection sa area exmaple nasa 100giga bandwidth lang kaya ibuga ng tower nyo tapos may matatakaw mag download or lagpas 200 subcribers naka konek , natural babagal yan... kaya na USO yung FUP Fair Usage Policy... ang mabilis na speed makakamtam molang yata sa 12 am hangang 9am yung mga oras na yun wala masiydong user or di congested yung network nyo..; June 3, 2015 at 11:57 PM
Unknown said...: Sir may tnung po ko..ung pgblik ng wifi capability bkt remove ung default cfg?; June 7, 2015 at 5:56 AM
Chucks said...: dahil papalitan mo yung sirang def ng bago defualt working def; June 7, 2015 at 12:27 PM
Unknown said...: Boss me myBro green packet dv235t ako, ok lang ba kaw nlang gumawa ng reconnection.
Mag bbayad nlang ako boss. Q.C area ako.
Pm mko if interested ka, docmichaeldv@yahoo.com
T.y; August 28, 2015 at 1:21 AM
Unknown said...: Boss me myBro green packet dv235t ako, ok lang b sau ko nlang pagawa reconnection.
Mag bbayad nlang ako, Q.C area po ako, pls pm me if interested. docmichaeldv@yahoo.com
T.y; August 28, 2015 at 1:27 AM
Unknown said...: sir di po gumana ung telnet 10.1.1.254 kahit nadowngrade ko na..ano dapat ko gamit?; September 10, 2015 at 9:18 AM
Unknown said...: Sir Jaime Lacson, sorry to this question, Under management walang upgrade sa akin. what will i do. please help me. thanks; September 20, 2015 at 7:00 PM

Header Ads

How to Downgrade and Reconnect SMART MyBrO Wimax +WiFi GreenPacket DV-235t